How To Make Automatic Watering System For Plants
Automatic watering systems for plants will be a great watering gardening idea which will make your plants well irrigated with sufficient amount of water. You will find it very easy, simple and save many times since you do need to be around in your garden to do garden watering, in fact this watering method can simply done although you are far away from your garden. You can make the automatic watering systems for plants in your garden both indoor and outdoor which is taken for granted that will be very advantageous to you to have.
Indoor and Outdoor Gardening Automatic Watering System
If you have both indoor and outdoor gardening and want to provide automatic watering systems so that you will be relax with no tiring watering activity, then you should know ho to properly water your garden. For indoor watering you need to figure out how much water amount that the plants need, then you can simply develop watering system which will suit to be applied. You will find very easy in automatic plants watering, you just need to use unused plastic containers like cottage cheese container or sour cream container but before applying them, you better to clean them out along with their lids. Then slice the containers’ bottom by using knife and it is recommended to make x slice on the containers bottom for plants which need very wet and moisture environment. Set the container next to the plant in the dirt. You have to keep this on mind that you have to use containers which appropriate the plants pots. As the soil dries out once the water is filled into the container, water will be leaking out from the container right through the soil. However, the holes are plugged with the dirt, so the wet dirt will not allow any more water to leak out from the container.
For outdoor automatic watering system, you can start by taking a garden hose and make some slices in it with knife, but the slices should not more than just an inch long fraction with three or four inches apart across the hose. Then connect a hose end to a sprinkler in the end or center of your garden. Attach the other hose end to a timer and then attach it to a faucet. The water will flow through the hose with the timer for a certain amount according to your setting.